FUJI X half [Topic Général]

[Doudou_Lyon]

Au niveau de l'intérêt je suis bien d'accord avec toi et si en plus il est en plastique 

[Doudou_Lyon]

Je confirme il de conception en plastique. 
Une raison de plus de ne pas l'acheter 

[Didier70]

Je confirme il de conception en plastique. 
Une raison de plus de ne pas l'acheter 

Absolument d'accord. Ce jouet est un foutage de gueule.

[Doudou_Lyon]

C'est un truc fait pour que les influ-instagrameurs en disent du bien 

[cyril.aquitaine]

Finalement, ce n'est bien qu'un jouet en plastique. Sans intérêt.

Il y a un photographe américain ( c’est tellement plus crédible quand c’est américain) qui a fait toute une œuvre de photos de rue avec un appareil jouet en forme de Mickey. Ça faisait rigoler les gens !..

[Didier70]

Il y a un photographe américain ( c’est tellement plus crédible quand c’est américain) qui a fait toute une œuvre de photos de rue avec un appareil jouet en forme de Mickey. Ça faisait rigoler les gens !..

On attend les version Hello Kitty, Super Mario, Droopy, Garfield, Donald, Tintin, Schtroumpf et Marsupilami du X-Half.

[Doudou_Lyon]

On attend les version Hello Kitty, Super Mario, Droopy, Garfield, Donald, Tintin, Schtroumpf et Marsupilami du X-Half.

   

[mchris]

Fujifilm a publié une nouvelle mise à jour du firmware pour le X half en Version: 1.20  (22 juillet 2025)
ainsi qu'un guide des Nouvelles Fonctionnalités Version Version: 1.20

https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/x-hf1/

Detail of the firmware update
Ver.1.20
The firmware update Ver.1.20 from Ver.1.01 incorporates the following issues:


Regarding the details of No.1 download the “X half New Features Guide［Ver.1.20]” from our website.
X half New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

1.  The procedure for pairing the camera with a smartphone is changed.

2.  A firmware bug is fixed that the camera freezes in rare cases when power is turned off and on.

    < Precautions After Firmware Update >
    1) Network security level is improved by updating to the latest versions for both the smartphone applications (X half app) and connected cameras and instax™ printers (mini Link3, SQUARE Link and Link WIDE), since the latest versions change the network setting menus and connecting procedures to enhance the wireless communication security.
Be aware that the security level remains unchanged in the following cases.
* In case that the camera’s firmware is the current version, and the smartphone application (X half app) is the latest version.
* In case that the instax™ printer (mini Link3/SQUARE Link/Link WIDE) is the current version.

    2) After updating the camera firmware, if the smartphone application (X half app) is not updated to the latest version, you cannot connect to the camera. Be sure to upgrade your smartphone application software to the latest version.

[mchris]

Fujifilm a publié une nouvelle mise à jour du firmware pour le X half (X-HF1) en Version: 1.30  (6 janvier 2026)
ainsi qu'un guide des Nouvelles Fonctionnalités Version: 1.30


X half (X-HF1) Firmware update
Version: 1.30
https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/x-hf1/


X half Nouvelles Fonctionnalités (X-HF1) Version 1.30
https://fujifilm-dsc.com/en-int/manual/x-hf1/x-hf1_nfg_fr_s_f.pdf


Detail of the firmware update
Ver.1.30

The firmware update Ver.1.30 from Ver.1.20 incorporates the following issues:

 

Regarding the details of No.1,2,3,4,5 and 6 download the “X half New Features Guide［Ver.1.30]” from our website.

X half New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

1.    You can make prints from instax™ to connect the instax™ Evo and instax™ LiPlay series.

2.    When [AF MODE] is set to [AREA], you can move the focus frame on the LCD monitor using a swipe gesture.

3.    You can pull the [Frame Advance Lever] to prepare for the next shot even while recording images with [FILM CAMERA MODE].

4.    The movie icon is displayed on the nine-frame playback screen.

5.    Looks & feels of the screen is redesigned to improve the operation for pairing to smartphones.

6.    The [Direct Print] icon is added to the single-frame playback screen.
    When connecting to the instax™ printer, you can print directly through the playback screen just by tapping this icon.
    * For details, refer to No.4 in the New Features Guide.

7.    The operation flow is changed so that if you exit [Film Camera] mode without taking a single photo, you cannot develop the film in the X half app.

8.    Firmware bug fixes
    The following bugs are fixed.
    1)If you pair your smartphone without setting the [AREA SETTING] at initial setup, the date and time for [AREA SETTING] displayed at the next power-on will differ from the date and time of the smartphone getting at pairing.
    2)The preview image is sometimes flicking depending on the brightness of the shooting environment.
    3)Setting anything other than [OFF] in [FACE/EYE DETECTION SETTING] menu, the camera freezes when starting movie recording while looking through the viewfinder.
    4)When enlarging and previewing a 2-in-1 image and swiping left and right, the displayed image may stop at halfway position.
    5)[SHUTTER COUNT] increments unnecessarily.
    6)The charging indicator light remains lit occasionally even after the battery (NP-W126S) is fully charged in the camera body.
    7)Other minor bugs have been fixed.