41
Boitiers et optiques GFX / FUJIFILM GFX ETERNA 55 Mise à jour firmware Version 1.06
« Dernier message par mchris le 16 avril 2026 à 07h47 »Fujifilm a publié une mise à jour du firmware pour la caméra GFX ETERNA 55 en version: 1.06
ainsi que pour l'objectif GF32-90mmT3.5 PZ OIS WR en version: 1.02 (16 avril 2026)
GFX ETERNA 55 Firmware update Version: 1.06 Ã partir des versions 1.04 / 1.05
https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/gfx-eterna-55/
Detail of the firmware update
Ver.1.06
The firmware update Ver.1.06 from Ver.1.04/Ver.1.05 incorporates the following issues:
1. Display delay of the external monitor connected via SDI or HDMI is improved.
This improvement effects under either of the following setting conditions.
・PROJECT ➔ RESOLUTION ➔ 4K 4:3
・PROJECT ➔ MEDIA REC SETTING ➔ MEDIA REC SETTING ➔ ProResHQ, ProRes 422 or ProRes LT
・PROJECT ➔ F-Log2/HLG/RAW ➔ SDI/HDMI OUTPUT RAW SETTING ➔ OFF
2. The firmware bugs causing the following issues are fixed.
(1) When switching between the “MULTI†and “TRACKING†settings in AF mode, ‘AREA’ mode may occasionally become active even though “MULTI†is selected.
(2) When opening the Playback screen without a storage media inserted and pressing certain buttons, an unintended screen may appear.
(3) When attaching a FUJINON Duvo series lens to the GFX ETERNA 55 and operating the expander while recording, the camera freezes.
(4) AF tracking does not work when the FOCUS LEVER SETTING is set to “PUSH TO UNLOCKâ€
(5) The CLIP does not play during playback.
(6) When applying the default LUT in F-Log2C settings, banding may occasionally occur under high-saturation lighting conditions.
Note: As part of the measures to address the above issue, the 3D-LUT, F-Log2C_to_WDRâ€, for the GFX ETERNA 55 available on the following website is also updated from Ver.1.00 to Ver.1.10.
3D-LUT
(7) Other minor issues.
Objectif GF32-90mmT3.5 PZ OIS WR Firmware update (16 avril 2026)
Version: 1.02
https://www.fujifilm-x.com/fr-fr/support/download/firmware/lenses/gf32-90mmt35-pz-ois-wr/
* Please perform the firmware update in combination with the following camera body.
 ・GFX ETENA 55 and GFX100 II
Detail of the firmware update
Ver.1.02
The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:
1. The Focus response when controlling focus using the focus ring is improved.
2. Other minor firmware issues are fixed.
ainsi que pour l'objectif GF32-90mmT3.5 PZ OIS WR en version: 1.02 (16 avril 2026)
GFX ETERNA 55 Firmware update Version: 1.06 Ã partir des versions 1.04 / 1.05
https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/gfx-eterna-55/
Detail of the firmware update
Ver.1.06
The firmware update Ver.1.06 from Ver.1.04/Ver.1.05 incorporates the following issues:
1. Display delay of the external monitor connected via SDI or HDMI is improved.
This improvement effects under either of the following setting conditions.
・PROJECT ➔ RESOLUTION ➔ 4K 4:3
・PROJECT ➔ MEDIA REC SETTING ➔ MEDIA REC SETTING ➔ ProResHQ, ProRes 422 or ProRes LT
・PROJECT ➔ F-Log2/HLG/RAW ➔ SDI/HDMI OUTPUT RAW SETTING ➔ OFF
2. The firmware bugs causing the following issues are fixed.
(1) When switching between the “MULTI†and “TRACKING†settings in AF mode, ‘AREA’ mode may occasionally become active even though “MULTI†is selected.
(2) When opening the Playback screen without a storage media inserted and pressing certain buttons, an unintended screen may appear.
(3) When attaching a FUJINON Duvo series lens to the GFX ETERNA 55 and operating the expander while recording, the camera freezes.
(4) AF tracking does not work when the FOCUS LEVER SETTING is set to “PUSH TO UNLOCKâ€
(5) The CLIP does not play during playback.
(6) When applying the default LUT in F-Log2C settings, banding may occasionally occur under high-saturation lighting conditions.
Note: As part of the measures to address the above issue, the 3D-LUT, F-Log2C_to_WDRâ€, for the GFX ETERNA 55 available on the following website is also updated from Ver.1.00 to Ver.1.10.
3D-LUT
(7) Other minor issues.
Objectif GF32-90mmT3.5 PZ OIS WR Firmware update (16 avril 2026)
Version: 1.02
https://www.fujifilm-x.com/fr-fr/support/download/firmware/lenses/gf32-90mmt35-pz-ois-wr/
* Please perform the firmware update in combination with the following camera body.
 ・GFX ETENA 55 and GFX100 II
Detail of the firmware update
Ver.1.02
The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:
1. The Focus response when controlling focus using the focus ring is improved.
2. Other minor firmware issues are fixed.
Messages récents

