fuji-x.fr
Gamme Fuji X => Actualités, rumeurs ... => Discussion démarrée par: Pat5770 le 09 août 2017 à 19h16
-
j'ai vu qu'il y avait un nouveau firmware pour X-T2 version 2.11.
j'ai essayé de le charger , donc carte formatée, copie avec ordinateur du programme sur la carte, mise en place dans le boitier de la carte fente 1, allumage comme prévu et après le choix j'ai le message suivant " FIRMWARE NON TROUVE CARTE ETEIGNER L'APPAREIL "
j'ai fait plusieurs fois les manipulations avec des batteries différentes chargées , rien , alors explications ..... :TT
par avance merci
-
il s'appelle comment ton fichier firmware?
-
il s'appelle FWUP0010.DAT, mais j'ai réessayé une nouvelle fois et là, bingo, je pense que l'enregistrement avec mon lecteur de cartes était défaillant et que le firmware n'était pas enregistré sur la carte et le changement de lecteur à réglé le problème
-
nickel
-
Communiqué de fujifilm.com le 7 septembre 2017
New firmware updates for FUJIFILM X-Pro2, X-T2 X100F, X-T20 coming soon.
Les détails ici
http://www.fujifilm.com/news/n170907_06.html
Firmware Version vers la fin Novembre 2017 pour les deux boitiers : X-T2, X-T20
FUJIFILM X-T2: Ver.3.00
FUJIFILM X-T20: Ver.1.10
Firmware Version vers la fin Decembre 2017 pour les deux boitiers : X-Pro2, X100F
FUJIFILM X-Pro2: Ver.4.00
FUJIFILM X100F: Ver.2.00
-
il y a de très belles avancées dans ces maj
-
Avec cette maj, le X-Pro 2 a l'air de revenir au niveau du X-T2 ou j'ai manqué un truc?
curieux de voir cette nouvelle fonction "FUJIFILM X RAW STUDIO" qui a l'air d'être une réponse de Fuji par rapport à la critique récurrente concernant le traitement des RAF non?
-
Si j'ai bien tout suivi, en connectant l'appareil au Mac en USB, il sera possible de convertir les RAW en jpg (ou autre?) en passant par le processeur de l'apn. Et tout ça en mode batch ? Gain de temps (ça reste à voir !) et meilleure qualité de dématriçage à la clé. Ca fait un peu usine à gaz, mais why not ?!
-
J'ai hâte d'attendre pour voir ...
-
J'ai hâte d'attendre pour voir ...
J'adore cette phrase :ROUL :ROUL :ROUL
-
moi aussi.
il y a celle là qui est top dans le même style:
il est urgent d'attendre :ERIR :ERIR
-
Bonjour,
Des mises à jour correctives de Firmware pour X-T2 et X-Pro2 et 2 objectifs viennent d'être publiées le 5 octobre 2017
X-T2 Camera Body Firmware Update Ver.2.12
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html)
Detail of the update
The firmware update Ver.2.12 from Ver.2.11 incorporates the following issue:
1. The phenomenon is fixed that in rare cases, a freeze could occur during repeated CH (continuous high speed) shooting and so on
X-Pro2 Camera Body Firmware Update Ver.3.12
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro2/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro2/index.html)
Detail of the update
The firmware update Ver.3.12 from Ver.3.11 incorporates the following issue:
1. The phenomenon is fixed that in rare cases, a freeze could occur during repeated CH (continuous high speed) shooting and so on.
FUJINON XF Lens: XF 18-55mm F2.8-4 R LM OIS Firmware Update Ver.3.22
http://www.fujifilm.com/support/digital_cameras/software/firmware/lens/xf18-55mm/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/lens/xf18-55mm/index.html)
Detail of the update
The firmware update Ver.3.22 from Ver.3.21 incorporates the following issue:
1. The phenomenon is fixed that in rare cases, a focal length could be displayed wrongly and/or shaking could be seen in a peripheral part of images even if a focal length and a focus are fixed.
FUJINON XF Lens: XF 10-24mm F4 R OIS Firmware Update Ver.1.12
http://www.fujifilm.com/support/digital_cameras/software/firmware/lens/xf10-24mm/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/lens/xf10-24mm/index.html)
Detail of the update
The firmware update Ver.1.12 from Ver.1.11 incorporates the following issue:
1.The phenomenon is fixed that in rare cases, a focal length could be displayed wrongly and/or shaking could be seen in a peripheral part of images even if a focal length and a focus are fixed.
-
merci pour l'info mchris :TTC
-
Bonsoir à tous,
N'ayant pas vu d'info à ce sujet dans le site, je fais part de l'annonce de la parution du firmware V3 pour le XT-2, annoncée pour jeudi par Fujirumors, avec entre-autre une considérable amélioration du suivi AF... Wait and see.
https://www.fujirumors.com/category/rumors/
-
L'annonce avait bien été faite le 7 sept par Fuji et soulignée par Jm51, mais plus de nouvelles depuis.
-
vu qu'il n'est pas encore sorti, c'est dans "actualité /rumeur" qu'il faut chercher ;) je déplace :SI
-
Justement les rumeurs du jour ( https://www.fujirumors.com/) indiquent que la date de prochaine mise à jour du XT2/XT20 et GFX est confirmée pour demain 30 Novembre avec 2 nouvelles améliorations / aux 4 initialement prévues :
"As we reported here, Fujifilm will release a Firmware update for Fujifilm X-T2, X-T20 and GFX on November 30, 2017.
Regarding the X-T2, Fujifilm officially announced 4 new features/improvements:
New AF tracking algorithm for moving subject
Support “FUJIFILM X RAW STUDIO”
Improve radio flash controller usability
Support for backup/restore of camera settings via FUJIFILM X Acquire
But I’m pleased to inform that, although Fujifilm officially does not mention it, I hear there will be more! And to be more precise the X-T2 will also get:
highlight overexposure blinkies
RGB color histogram
Now this is a serious X-T2 Kaizen update :) Well done Fuji. ...."
-
X-T2 Camera Body Firmware Update Ver.3.00 :
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/download.html
et cerise sur le gâteau :luv
http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/x/fujifilm_xt2_manual_01_fr.pdf
-
Nouvelles mises à jour de Firmware pour les boitiers
X-T2 , X-T20 et GFX 50S du 30 novembre 2017
Fujifilm vient de publier de nouvelles mises à jour de Firmware pour les boitiers
X-T2 , X-T20 et GFX 50S le 30 novembre 2017
ainsi que les 3 manuels pdf (téléchargeables) , des nouvelles fonctionnalités.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
X-T2 Camera Body Firmware Update Ver.3.00
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html)
Detail of the update
The firmware update Ver.3.00 from Ver.2.12 incorporates the following issues:
Regarding the details of No.2, 3, 5 and6, download the "X-T2 New Features Guide[Ver.3.00]" from our website.
X-T2 : Nouvelles fonctionnalités version 3.00
http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/x/fujifilm_xt2_manual_01_fr.pdf (http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/x/fujifilm_xt2_manual_01_fr.pdf)
1. New AF tracking algorithm for moving subject
Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware. In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before.
2. Support "FUJIFILM X RAW STUDIO" for Macintosh
Once connecting a camera to a computer via USB cable, the "FUJIFILM X RAW STUDIO" enables users to convert RAW files with X Processor Pro. The fast batch processing will also be available. The "FUJIFILM X RAW STUDIO" can be downloaded from the FUJIFILM website for free.
*"FUJIFILM X RAW STUDIO Ver.1.0 Installer for Macintosh" can be downloaded from the URL below.
FUJIFILM X RAW STUDIO Ver.1.0 Installer for Macintosh
3. Improve radio flash controller usability
The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.
4. Support for backup/restore of camera settings via "FUJIFILM X Acquire"
Once connecting a camera to a computer via USB cable, the "FUJIFILM X Acquire" allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.
*"FUJIFILM X Acquire Ver.1.7 Installer for Windows/Macintosh" can be downloaded from the URL below.
FUJIFILM X Acquire Ver.1.7 Installer for Windows/Macintosh
5. Support for "Instax SHARE SP-3"
Additionally," Instax SHERE SP-3" has become compatible with this camera.
6. RGB histogram display and highlight warning
If you press the function button allocated to the histogram, RGB histogram and highlight warning (High brightness portion will blink.) are displayed.
7. The phenomenon is fixed that exposure compensation is not correctly reflected to brightness of live view on LCD and EVF when ISO setting is "AUTO", exposure compensation is "C" and it is changed by the command dial.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
X-T20 Camera Body Firmware Update Ver.1.10
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt20/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt20/index.html)
Detail of the update
The firmware update Ver.1.10 from Ver.1.02 incorporates the following issues:
Regarding the details, download the "X-T20 New Features Guide[Ver.1.10]" from our website.
X-T20 : Nouvelles fonctionnalités version 1.10
http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/x/fujifilm_xt20_manual_01_fr.pdf (http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/x/fujifilm_xt20_manual_01_fr.pdf)
Touch panel operation when using the EVF
The firmware update will make it possible to use the touch panel while looking into the viewfinder. According to the operation method, it's possible to set the effective range of the touch panel to the full screen, right half, left half, or OFF.
2. Support for "Instax SHARE SP-3"
Additionally," Instax SHERE SP-3" has become compatible with this camera.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
GFX 50S Camera Body Firmware Update Ver.2.00
http://www.fujifilm.com/support/digital_cameras/software/firmware/gfx/gfx50s/index.html (http://www.fujifilm.com/support/digital_cameras/software/firmware/gfx/gfx50s/index.html)
Detail of the update
The firmware update Ver.2.00 from Ver.1.11 incorporates the following issues:
Regarding the details except for No.3, download the "GFX 50S New Features Guide[Ver.2.00]" from our website.
GFX 50S : Nouvelles fonctionnalités version 2.00
http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/gfx/fujifilm_gfx50s_manual_01_fr.pdf (http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/gfx/fujifilm_gfx50s_manual_01_fr.pdf)
1. Support "FUJIFILM X RAW STUDIO" for Macintosh
Once connecting a camera to a computer via USB cable, the "FUJIFILM X RAW STUDIO" enables users to convert RAW files with X Processor Pro. The fast batch processing will also be available. The "FUJIFILM X RAW STUDIO" can be downloaded from the FUJIFILM website for free.
*"FUJIFILM X RAW STUDIO Ver.1.0 Installer for Macintosh" can be downloaded from the URL below.
FUJIFILM X RAW STUDIO Ver.1.0 Installer for Macintosh
2. Improve radio flash controller usability
The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.
3. Support for backup/restore of camera settings via "FUJIFILM X Acquire"
Once connecting a camera to a computer via USB cable, the "FUJIFILM X Acquire" allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.
*"FUJIFILM X Acquire Ver.1.7 Installer for Windows/Macintosh" can be downloaded from the URL below.
FUJIFILM X Acquire Ver.1.7 Installer for Windows/Macintosh
4. Addition of "Eye Sensor + LCD Image Display" in the View Mode
The update gives the "Eye Sensor + LCD Image Display" option in the View Mode that allows you to shoot through the viewfinder and check images on the LCD, just as you would with an SLR.
5. ON/OFF for 1/3-step shutter speed adjustment
The update allows you to turn off the Command Dial's function to adjust shutter speed by 1/3 steps in order to prevent unintended adjustments.
6. Addition of "Shoot Without Card" mode
With the update, you can have the "Shoot Without Card" mode turned OFF so that the camera will not shoot when there is no SD card inserted.
7. Addition of "-6" and "-7" to EVF's brightness setting
The update will extend the "EVF Brightness" setting options to "-6" and "-7" so that, even in an extremely low-light condition, the brightness of the EVF does not distract you from shooting.
8. Support for " Instax SHARE SP-3"
Additionally, "Instax SHERE SP-3" has become compatible with this camera.
-
merci :TTC
-
merci :TTC
Normal, le partage il n'y a que ça qui fait avancer les choses ;)
-
Connexion impossible sur le site fuji pour téléchargement de "FUJIFILM RAW STUDIO" , comme un départ en weekend :ROUL
-
bonjour
Nouveau firmware version 3 pour fuji xt2 aujourdhui
Merci
-
les liens pour telecharger X raw Studio et acquire 1.7 indisponible ce matin. :SI
-
vu qu'il n'est pas encore sorti, c'est dans "actualité /rumeur" qu'il faut chercher ;) je déplace :SI
OK Julius, mais avoue que c'était pas loin :clap
-
Tous les sujets sur les nouveaux firmwares sont désormais fusionnés.
Jc.
-
Comme il est bon de réver, peut-être un jour fuji se souviendra des pionniers en leur proposant une petite évolution de leurs vieux boitiers :SI :SI :SI A force de vanter à tout bout de champ leur esprit "Kaizen", je crois qu'ils l'ont perdu dans le champ justement :SI :SI
-
Pour la version X Raw Studio Windows il faut attendre Février 2018 >:(
"
FUJIFILM X RAW STUDIO
Windows
Coming in the end of February 2018
"