Auteur Sujet: Nouvelle mise à jour du Firmware en version 4.00 pour le X-Pro2 du 22 déc. 2017  (Lu 7927 fois)

mchris

  • Hero Member
  • *****
  • Messages: 1751
Fujifilm vient de publier la nouvelle mise à jour du Firmware en version 4.00 pour le X-Pro2
le 22 décembre 2017
ainsi qu'un manuel pdf (téléchargeable) , des nouvelles fonctionnalités du X-Pro2.


X-Pro2 Camera Body Firmware Update Ver.4.00
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro2/index.html


Detail of the update

The firmware update Ver.4.00 from Ver.3.12 incorporates the following issues:

    1. Addition of 4K video mode (excluding HDMI out)
    The update adds 4K video using the X Series' famous Film Simulation modes. You can input audio from an external microphone.
    (Excluding HDMI output for recording)

    2. Support for tether shooting via USB or Wi-Fi
    After connecting a camera to a computer, the compatible software will enable users to transfer images taken with the camera to the computer and save them in a specified folder, or to control the camera from the computer.
    To use the Tether shooting by wireless communication, one of the PC application software below and additional setting are required. For detail of the setting, refer to the setting manual.

    How to set
        Tethered Shooting via Wi-Fi


    <PC application software >
    ・Tether Shooting Plug-in PRO for Adobe® Photoshop® Lightroom® Ver.1.7(*1)
    ・Tether Shooting Plug-in for Adobe® Photoshop® Lightroom® Ver.1.7(*2)
    ・Tether Shooting Software HS-V5 Ver.1.7 for Windows(*3)
    ・FUJIFILM X Acquire Ver.1.7 Installer(*4)

    *1: You can purchase it from Adobe Add-ons below.
        Windows version
        Mac version

    *To use the software, you need to purchase separately Adobe® Photoshop® Lightroom® 6/Classic CC. Compatible OS is based on each OS of Lightroom.
    *To use it with macOS Sierra, either of Lightroom 6.7 and newer or Classic CC is required.

    *2:You can purchase it from Adobe Add-ons below.
        Windows version
        Mac version

    *To use the software, you need to purchase separately Adobe® Photoshop® Lightroom® 6/Classic CC. Compatible OS is based on each OS of Lightroom.
    *To use it with macOS Sierra, either of Lightroom 6.7 and newer or Classic CC is required.

    *3:You need to purchase the HS-V5 and upgrade it to the latest version downloaded from our website.
        Tethered Shooting Software HS-V5 for Windows® Ver.1.7 Updater
        *For customers who have purchased the HS-V5, Tether Capture Plug-in Photoshop® Lightroom® Ver.1.7 is provided for free.
        Tethered Capture Plug-in for Adobe® Photoshop® Lightroom® Ver.1.7

    *4:You need to download FUJIFILM X Acquire Ver.1.7 Installer from the website below to update it.
        FUJIFILM X Acquire Ver.1.7 Installer

    3. New AF tracking algorithm for moving subject
    Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware. In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before.

    4. Support "FUJIFILM X RAW STUDIO"(Macintosh)
    Once connecting a camera to a computer via USB cable, the "FUJIFILM X RAW STUDIO" enables users to convert RAW files with X Processor Pro. The first batch processing will also be available. The "FUJIFILM X RAW STUDIO" can be downloaded from the FUJIFILM website for free.
    *"FUJIFILM X RAW STUDIO Ver.1.0 Installer for Macintosh" can be downloaded from the URL below.
        FUJIFILM X RAW STUDIO Ver.1.0 Installer for Macintosh

    5. Improve radio flash controller usability
    The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.

    6. Support for backup/restore of camera settings via FUJIFILM X Acquire
    Once connecting a camera to a computer via USB cable, the "FUJIFILM X Acquire" allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.
    *Settings other than date, custom white balance, custom registration/edit can be backup and restored.
    * FUJIFILM X Acquire Ver.1.7 Installer can be downloaded from our website.
        FUJIFILM X Acquire Ver.1.7 Installer for Windows/Macintosh

    7. Support for "Instax SHARE SP-3"
    Additionally, "Instax SHERE SP-3" has become compatible with this camera.

    8. RGB histogram display and highlight warning
    If you press the function button allocated to the histogram, RGB histogram and highlight warning (High brightness portion will blink.)are displayed.

    9. Re-start of AF function during a movie shooting
    AF function can be done again by pressing the shutter button halfway during a movie shooting.

----------------------------------------------------------------------------------------------------
Pour les détails, téléchargez le guide des nouvelles fonctionnalités du X-Pro2 version 4.00
Guide X-Pro2 Nouvelles fonctionnalités version 4.00
http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/x/fujifilm_xpro2_manual_fr.pdf

AxelThailand

  • FujiGraphe
  • *****
  • Messages: 2254
    • SIAM & SEAS
  • Boitier 1: X-Pro 2
  • Boitier 2: X-T3
  • Objectif 1: Quelques fixes pour le X-Pro2...
  • Objectif 2: Les zooms à f2.8 pour le X-T3 !
Maj effectuée, pas de bug visible à priori, la visualisation des high light dans le viseur est sympa, pour le reste plus difficile à évaluer sachant que je n'utilise pas beaucoup l'AF-C ni la video  :M

mchris

  • Hero Member
  • *****
  • Messages: 1751
Un soucis aurait été signalé sur certains X-Pro2  depuis la mise à jour en version 4.00 et dans un cas précis.

Lors de l'utilisation de filtres avancés(*), l'appareil peut se bloquer, il faudra retirer la batterie.
src fujirumors
https://www.fujirumors.com/fujifilm-x-pro2-firmware-ver-4-00-camara-lock-reports/
Ce problème intervient si les paramètres du boitier sont :
- Qualité d'image -> Raw + Jpeg
- Enregistrement Brut -> (Raw) Compressé sans perte

------------------------------------------------------------------------------------------------------------------------
(*) Les Filtres avancés (src Fujifilm)
Créez des images uniques grâce à l'un des huit filtres avancés. Les effets spéciaux incluent "Appareil jouet" (Toy Camera) pour un look rétro, Miniature pour créer un effet diorama ou encore Couleur Pop (Pop Color) pour des niveaux élevés de contraste et de saturation. Vous pouvez obtenir un aperçu de l’effet dans le viseur ou sur l’écran LCD.
------------------------------------------------------------------------------------------------------------------------

mchris

  • Hero Member
  • *****
  • Messages: 1751
... la visualisation des high light dans le viseur est sympa...

Pour l'affichage en surbrillance des zones sur-exposées, la description dans les "Nouvelles Fonctionnalités" est un peu succincte :
"Pour afficher des histogrammes RVB distincts et les zones de l’image surexposées avec les réglages
en cours, en superposition de la vue passant par l’objectif, appuyez sur la touche de fonction à
laquelle l’option HISTOGRAMME est attribuée."


Car il doit être nécessaire d'avoir l'option "Affichage des Hautes lumières" dans le
Menu de Réglage -> Configuration Ecran -> Réglages personnalisés.

mchris

  • Hero Member
  • *****
  • Messages: 1751
Fujifilm vient de confirmer le problème de blocage lorsque le X-Pro2 est configuré avec certains paramètres, et annonce la préparation d'un nouveau firmware pour le X-Pro2 ( ou tout au moins un correctif à venir)
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro2/index.html

Notice for customers
We have confirmed that X-Pro2 with the upgraded firmware (ver.4.00) released on Dec 22 2017 stops working in certain settings.
We deeply apologize for your inconvenience this may cause. The symptom will happen only when all three conditions below are set at the same time.

1) IMAGE QUALITY : FINE+RAW or NORMAL + RAW
2) RAW RECORDING : LOSSLESS COMPRESSED
3) DRIVE : any of ADVANCED FILTER
* This is not factory setting. If the symptom happens, please remove the battery once for recovery. We are preparing a revised firmware as a solution and plan to release it as soon as possible.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22